Filter by

Availability
Price
$
$
Shop By Categories

Racepak

Showing 677 of 677 products
Filter Products

Filter Products

Showing 677 of 677 products

Availability
Clear
Price

The highest price is $4,042.00

$
$
Clear
  • Prop_65_Label.jpg
    Racepak
    Can2 Cable; Single Ended; 197 in.;
    $111.00
    $111.00
    $111.00
    Can2 Cable; Single Ended; 197 in.;
  • Prop_65_Label.jpg
    Racepak
    Can2 Cable; Single Ended; 72 in.;
    $67.06
    $67.06
    $67.06
    Can2 Cable; Single Ended; 72 in.;
  • Prop_65_Label.jpg
    Racepak
    Chassis Wiring Harness Connector
    $12.87
    $12.87
    $12.87
    Interface Dust Cap Female; Prevents Debris From Collecting In Exposed Interface Or Analog Connection;
  • p-1202-280-ca-im-dcapm_1024x1024e6116db2-b527-41ec-820c-ad8984db0b76.jpg
    Racepak
    Chassis Wiring Harness Connector
    $11.58
    $12.87
    $11.58
    This dust cap is used to prevent debris from collecting in an exposed interface or analog connection. Comes installed on ANALOG port on V300SD, V500SD and G2X Pro.
  • p-853-230-vm-event_1024x1024_5897e57f-87d1-4352-97ca-5c23bda21a9a.jpg
    Racepak
    Clutch Event 12 Volt Triggered
    $190.00
    $190.00
    $190.00
    This V-Net module allows users to monitor the release of a clutch activated or similar contact closure switch.
  • p-658-2crpm.jpg
    Racepak
    Clutch RPM Sensor; Picks Up Clutch RPM; Monitors Wheel Speed RPM On Motorcycles;
    $212.00
    $212.00
    $212.00
    This speed sensor is used to pick up Clutch (input shaft) RPM. It is also used for monitoring Wheel Speed RPM on motorcycles.
  • p-848-1crpm_large_e0e789ec-63da-43e7-af80-a6a2183fff4a.jpg
    Racepak
    Clutch RPM; Monitors Magnetic Pulses Using Zero Crossing Sensor;
    $355.95
    $396.00
    $355.95
    This V-Net module and sensor allow units with a clutch RPM pickup on the harness to add clutch (input shaft) RPM monitoring to determine both clutch slip and transmission slip. Comes with zero-cros...
  • Prop_65_Label.jpg
    Racepak
    Communication Interface Module Connector
    $562.00
    $562.00
    $562.00
    This interface module is used to convert the serial data stream for an AEM EMS unit into a CAN bus data stream compatible with the Racepak V-Net System. Data from the module is then available for u...
  • Prop_65_Label.jpg
    Racepak
    Communication Interface Module Connector
    $562.00
    $562.00
    $562.00
    This interface module is used to convert the serial data stream for an Autronic SM4 V107 And V109 unit into a CAN bus data stream compatible with the Racepak V-Net System. Data from the module is t...
  • p-2041-230-vm-efimotsr.jpg
    Racepak
    Communication Interface Module Connector
    $562.00
    $562.00
    $562.00
    The MoTeC interface module is used to convert the data stream from the MoTeC RS232 output in to a format compatible with the Racepak V-Net System. Data from the module is then available for use wit...
  • Prop_65_Label.jpg
    Racepak
    Communication Interface Module Connector
    $562.00
    $562.00
    $562.00
    The EFI Technology interface module is used to convert the data stream from the EFI Tech data stream in to a format compatible with the Racepak V-Net System. Data from the module is then available ...
  • Prop_65_Label.jpg
    Racepak
    Communication Interface Module Connector
    $170.95
    $190.00
    $170.95
    This module allows you to monitor a 12 volt event, such as the release of a powered button. Not for use with a contact closure switch (see 230-VM-EVENTSW)
  • Prop_65_Label.jpg
    Racepak
    Communication Interface Module Connector
    $110.00
    $110.00
    $110.00
    This adapter harness is used to connect the CAN bus data stream from your ECU to the Racepak IQ3S (Street Dash), IQ3D (Drag Dash) or Racepak Universal CAN module. Once connected and properly setup,...
  • 280-ca-efib3s31979.jpg
    Racepak
    Communication Interface Module Connector
    $110.00
    $110.00
    $110.00
    This adapter harness is used to connect the CAN bus data stream from your ECU to the Racepak IQ3S (Street Dash), IQ3D (Drag Dash) or Racepak Universal CAN module. Once connected and properly setup,...
  • Prop_65_Label.jpg
    Racepak
    Communication Interface Module Connector
    $74.19
    $74.19
    $74.19
    This adapter harness is used to connect the CAN bus data stream from your ECU to the Racepak IQ3S (Street Dash), IQ3D (Drag Dash) or Racepak Universal CAN module. Once connected and properly setup,...
  • p-1715-280-ca-efifuel.jpg
    Racepak
    Communication Interface Module Connector
    $110.00
    $110.00
    $110.00
    This adapter harness is used to connect the CAN bus data stream from your ECU to the Racepak IQ3S (Street Dash), IQ3D (Drag Dash) or Racepak Universal CAN module. Once connected and properly setup,...
  • Prop_65_Label.jpg
    Racepak
    Communication Interface Module Connector
    $98.86
    $110.00
    $98.86
    This adapter harness is used to connect the CAN bus data stream from your ECU to the Racepak IQ3S (Street Dash), IQ3D (Drag Dash) or Racepak Universal CAN module. Once connected and properly setup,...
  • Prop_65_Label.jpg
    Racepak
    Communication Interface Module Connector
    $105.00
    $105.00
    $105.00
    ECU Interface Cable; Holley Molex; Connects The CAN Bus Data Stream From The ECU To The Racepak IQ3S/IQ3D/Racepak Universal CAN Module;
  • p-1715-280-ca-efilink.jpg
    Racepak
    Communication Interface Module Connector
    $110.00
    $110.00
    $110.00
    This adapter harness is used to connect the CAN bus data stream from your ECU to the Racepak IQ3S (Street Dash), IQ3D (Drag Dash) or Racepak Universal CAN module. Once connected and properly setup,...
  • p-1715-280-ca-efimefi.jpg
    Racepak
    Communication Interface Module Connector
    $110.00
    $110.00
    $110.00
    This adapter harness is used to connect the CAN bus data stream from your ECU to the Racepak IQ3S (Street Dash), IQ3D (Drag Dash) or Racepak Universal CAN module. Once connected and properly setup,...
  • 280-ca-efiobdii1979.jpg
    Racepak
    Communication Interface Module Connector
    $98.86
    $110.00
    $98.86
    This adapter harness is used to connect the CAN bus data stream from your ECU to the Racepak IQ3S (Street Dash), IQ3D (Drag Dash) or Racepak Universal CAN module. Once connected and properly setup,...
  • Prop_65_Label.jpg
    Racepak
    Communication Interface Module Connector
    $74.19
    $74.19
    $74.19
    This adapter harness is used to connect the CAN bus data stream from your ECU to the Racepak IQ3S (Street Dash), IQ3D (Drag Dash) or Racepak Universal CAN module. Once connected and properly setup,...
  • 250-UG-UDXPG.jpg
    Racepak
    Computer Aided Design Software
    $155.00
    $155.00
    $155.00
    Use these cables and Racepak programming software to update and add sensors to your UDX Replay or Street Dash.
  • Prop_65_Label.jpg
    Racepak
    Contact Closure Drive Shaft Sensor
    $124.95
    $139.00
    $124.95
    This speed sensor is commonly used to detect Drive Shaft RPM or Wheel RPM. This plastic sensor has a 5/16 in. fine thread pitch and is triggered using magnets. Works with the following Racepak data...

Showing 73 -96 of 677 items